Moto G7 and G7 Power Screen Replacement Guide

A Moto G7 screen replacement is one of the cheaper phone repairs in the UK, because the G7 family uses LCD screens rather than OLED. At E-Tech61, a Moto G7 LCD screen and digitiser assembly is £10.99, the G7 Power (XT1955) screen is £9.26 and the G7 Play (XT1952) screen is £10.79 (checked 15 October 2026). Labour is extra if a repair shop fits it. The key is ordering the right part: the G7, G7 Power, G7 Play and G7 Plus look similar but their screens are not interchangeable. If the phone rings but the screen stays black, the cause may be a loose connector or the LCD flex cable rather than the screen itself. This guide explains how to identify your model, diagnose the fault and fit the replacement.

Which Moto G7 do you have?

Motorola launched the G7 family in early 2019, described in Wikipedia's Moto G7 article. The four models differ in screen size, resolution and notch shape:

Model	Model code	Screen	Notch
Moto G7	XT1962	6.2-inch Full HD+ LCD	Small waterdrop
Moto G7 Power	XT1955	6.2-inch HD+ LCD	Wide notch
Moto G7 Play	XT1952	5.7-inch HD+ LCD	Wide notch
Moto G7 Plus	XT1965	6.24-inch Full HD+ LCD	Small waterdrop

Find your model code in Settings > About phone, on the box, or on the label in the SIM tray area. The G7 Power's large 5,000mAh battery and wide notch make it easy to tell apart from the standard G7. Always order by model code.

What does a Moto G7 screen replacement cost?

Part	Price at E-Tech61 (checked 15 October 2026)
Moto G7 LCD screen replacement	£10.99
Moto G7 Power (XT1955) LCD screen replacement	£9.26
Moto G7 Play (XT1952) LCD screen replacement	£10.79
Moto G7 LCD flex cable	£2.49

If you fit the screen yourself, your total is the part plus basic tools and adhesive. If a repair shop fits it, add their labour charge, which varies between shops; ask for a written quote. Because the parts are inexpensive, the repair is usually worthwhile if the rest of the phone works well, even though the G7 range is several years old.

Diagnose the fault

Symptom	Likely cause	Fix
Cracked glass, display and touch working	Broken front glass	Screen and digitiser assembly
Lines, blotchy colour or bleeding	Damaged LCD	Screen assembly
Screen black, phone rings or vibrates	Failed LCD, loose connector or damaged LCD flex	Check the connector, then the flex, then the screen
Screen flickers or cuts out when pressed	Loose connector or LCD flex fault	Reseat, or replace the LCD flex cable
Touch does not follow your finger	Digitiser damage	Screen assembly
Screen lifting from the frame	Swollen battery or failed adhesive	Stop charging; check the battery first

Motorola G7 black screen: what to try first

1. Force restart: hold the Power button for around 10 to 20 seconds until the phone restarts.
2. Charge for 30 minutes with a known-good USB-C cable and plug.
3. Check for signs of life: vibration, ringtones or notification sounds mean the phone is working and the display path has failed.
4. Shine a torch at the screen at an angle. A very faint image means the backlight has failed, which usually needs a new screen.
5. After a drop, a loose display connector is common. A repairer can reseat it before you buy a screen.

E-Tech61's G7 LCD flex cable listing notes that a faulty display is not always the flex itself: check the screen and its connectors first, because a loose connector can cause the same symptoms.

Before the repair: back up and prepare

A screen repair does not normally erase your data, but a backup protects you if something goes wrong. If the display still works, back up photos to Google Photos, contacts to your Google account and other files to a computer over USB. If touch has failed but the picture is visible, a USB-C mouse connected through an OTG adapter can often let you navigate the phone to finish a backup. Note your PIN or pattern, because whoever fits the screen will need to unlock the phone to test it. Remove the case and any screen protector, and photograph the phone's condition before handing it over.

DIY or repair shop?

	DIY	Repair shop
Cost	Part, tools and adhesive	Part plus labour
Risk	Moderate: cables and frames can be damaged	Lower
Time	One to two hours plus curing	Often same day
Best for	Confident DIYers	Anyone unsure

When choosing a shop, ask for a written quote that includes the screen, adhesive and labour, confirm they test the screen before gluing it, and check the warranty they give on parts and labour.

LCD vs OLED: why G7 screens cost less

The G7 family uses liquid-crystal displays with a backlight, rather than OLED panels where each pixel produces its own light. LCD screens are simpler and cheaper to make, which keeps replacement prices low. They are also more forgiving to fit, although the glass is still bonded to the LCD, so you replace the screen and digitiser as one assembly.

Choosing a good LCD

Replacement LCDs vary in brightness, colour accuracy, touch sensitivity and the width of the black border around the image. When comparing listings, check the model code, whether the digitiser is included and pre-joined, and the returns policy. E-Tech61's G7 screen is supplied as an LCD and touch digitiser already joined together, so there is nothing extra to align when fitting it.

How to replace a Moto G7 screen

Tools

• Heat source (heat mat, heat gun on low, or hairdryer).
• Suction cup and thin plastic picks.
• Small Phillips and Torx screwdrivers.
• Plastic spudger and tweezers.
• Isopropyl alcohol and new adhesive.
• Eye protection.

Steps in outline

1. Back up your data if the phone still works, then power off and remove the SIM tray.
2. Open the phone. Depending on the model, you either heat and lift the back cover or heat and lift the screen. Work slowly with shallow picks.
3. Remove covers and screws to reach the battery and display connectors.
4. Disconnect the battery first, then the display connector.
5. Remove the old screen, freeing its flex cable carefully.
6. Clean the frame of glass and old adhesive with isopropyl alcohol.
7. Test the new screen before gluing: display, touch across the whole screen, brightness, earpiece, proximity sensor and front camera.
8. Glue and reassemble, clamping gently while the adhesive cures.

E-Tech61 recommends testing parts before final installation. Applying adhesive to a part voids change-of-mind returns, though your statutory rights for faulty or not-as-described items remain under UK law; see GOV.UK's consumer protection rights. Never lever against the battery, as a punctured lithium-ion battery can catch fire.

Common DIY mistakes

• Ordering the wrong model's screen. Check the XT model code first.
• Skipping the battery disconnect, risking damage to the new screen or the board.
• Pushing picks too deep, cutting the display or fingerprint flex cables.
• Overheating, which can damage the LCD, its backlight or plastic parts.
• Leaving old adhesive in place, so the new screen sits unevenly and lifts.
• Gluing before testing, which voids change-of-mind returns if the part has a problem.

Looking after the battery

By now, many G7 phones have tired batteries. If yours drains quickly, shuts down unexpectedly or gets warm in light use, consider replacing the battery while the screen is off, as it saves a second opening. Avoid leaving the phone charging in hot places, and stop using any phone whose battery has swollen. Take old batteries to a battery recycling point rather than household waste.

Moto G7 screens and parts

For a blank or flickering screen where the LCD itself is fine, the LCD flex cable is a low-cost part to try once connectors have been checked.

For the G7 Power and G7 Play, choose the screen listed for your model code:

The standard G7 screen is £10.99: see the Moto G7 LCD screen replacement. Browse other parts in the Moto G7 parts, Moto G7 Power parts, Moto G7 Play parts and Moto G7 Plus parts collections, or every model in the Motorola parts collection.

Moto E7 screen replacement

The Moto E7 range is a separate family of budget Motorola phones, so it needs its own screens even though the names look close to the G7.

Many people searching for G7 screens also own the Moto E7 or E7 Power. They are different phones with their own screens. At E-Tech61, the Moto E7 Power LCD screen is £11.69 and the Moto E7 TFT LCD screen in black is £17.49 (checked 15 October 2026). The same diagnosis and fitting steps apply. Our guides to Moto G Pure screen replacement and Motorola E20 display quality cover other budget Motorola models.

Is it worth repairing a Moto G7?

With screens around £10, repairing a G7 is usually far cheaper than replacing the phone, and the G7 Power's large battery makes it a popular backup or child's phone. The limits are age: the G7 range no longer receives major Android updates, so check that the apps you rely on, especially banking apps, still support it. If the battery is worn, replace it while the phone is open.

After the repair

Let the adhesive cure fully before normal use, then carefully check touch across the whole screen, brightness, the proximity sensor during calls and the front camera. Fit a screen protector and a case, as budget phones often lack the toughest glass.

Choosing a screen protector after the repair

A tempered glass protector is the cheapest insurance for your new screen. Choose one cut for your exact G7 model so it clears the notch, earpiece and front camera, and fit it in a dust-free room: a steamy bathroom after a shower is a good trick for reducing dust. Clean the screen with the supplied wipe, align the protector using the camera cut-out, then press from the centre outwards to push out air bubbles. Pair it with a case that has a slightly raised front edge, so the screen does not touch the ground if the phone lands face down.

Ordering from E-Tech61

Orders paid before 4pm Monday to Friday are dispatched the same day from Manchester. Royal Mail Tracked 48 is free on UK orders of £5 or more (£2.49 below that), Royal Mail Special Delivery Guaranteed by 1pm is available at checkout, and you can collect from our shop at 33 Moulton St, Manchester M8 8FQ. Unused items can be returned within 30 days.

Frequently asked questions

How much does it cost to replace a Moto G7 screen?

The Moto G7 LCD screen is £10.99 at E-Tech61, checked 15 October 2026. If a repair shop fits it, add their labour charge; ask for a written quote before you book.

How much is a Moto G7 Power screen replacement?

The Moto G7 Power (XT1955) LCD screen is £9.26 at E-Tech61. Make sure you order the Power version, because the standard G7 screen will not fit it.

Why is my Motorola G7 screen black?

It could be a failed LCD, a loose display connector after a drop, or a damaged LCD flex cable. Force restart and charge first, then check connectors before buying parts.

Do G7 Play and G7 Power screens fit the G7?

No. The G7, G7 Power, G7 Play and G7 Plus have different screen sizes, resolutions and notches. Order the screen listed for your model code.

Is the Moto G7 screen easy to replace?

It is easier than many curved OLED phones, but it still involves heat, prying and disconnecting the battery. Experienced DIYers can manage it; otherwise use a repair shop.

Summary

Moto G7 screens are inexpensive LCD assemblies, but each G7 model needs its own part. Identify your model code, diagnose whether the screen, connector or LCD flex is at fault, and test the new screen before gluing it in.