Samsung Galaxy S10 Back Glass Replacement Guide

Replacing the back glass on a Samsung Galaxy S10 is one of the more approachable phone repairs: you warm the cracked back to soften its adhesive, lift it off with a suction cup and plastic picks, clean the frame, and press on a new battery cover with fresh adhesive. Unlike many iPhones, the Galaxy S10's back glass is a separate panel glued to the phone rather than fused to the frame, so no laser machine is needed. Our replacement Galaxy S10 battery covers with adhesive start at £4.89 (checked 15 October 2026). The key qualification is to buy the cover for the exact model: the S10, S10e, S10+ and S10 5G all use different backs. This guide covers choosing the part, the repair, and the checks afterwards.

Make sure you have a Galaxy S10, not an S10e, S10+ or S10 5G

The Galaxy S10 family looks similar, but every model has a different size and camera layout, so the backs are not interchangeable.

Model	UK model number	Rear cameras
Galaxy S10e	SM-G970F	Two
Galaxy S10	SM-G973F	Three
Galaxy S10+	SM-G975F	Three
Galaxy S10 5G	SM-G977B	Four (including a depth camera)

Check your model number in Settings, About phone, or on the box it came in. This guide and the covers below are for the Galaxy S10 (SM-G973F). For other models, see our Galaxy S10 5G parts and Galaxy S10+ parts collections.

Galaxy S10 back covers and prices

We sell Galaxy S10 battery covers with adhesive included, in several of the S10's colours. Prices were read from our store on 15 October 2026.

Colour	Price
Prism Blue	£4.89
Flamingo Pink	£5.89
Prism Black	£6.89
Prism Green	£6.89
Prism White	£6.89

Choose the colour that matches your phone's frame. Samsung's prism finishes shift in tone with the light, so compare against your phone in daylight when choosing. Each cover is dispatched the same day from Manchester on orders placed before 4pm, Monday to Friday, and unused items can be returned within 30 days.

For Samsung Galaxy S10 Battery Cover with Adhesive (Prism Black)Buy now – £6.89

For Samsung Galaxy S10 Battery Cover with Adhesive (Prism Blue)Buy now – £4.89

For Samsung Galaxy S10 Battery Cover with Adhesive (Flamingo Pink)Buy now – £5.89

The Prism Green and Prism White covers are also available. Browse every Galaxy S10 part in our Samsung Galaxy S10 G973F parts collection.

Camera lens cover: check before you start

The glass over the rear cameras sits in a cut-out in the back cover. On some replacement backs it is fitted; on others it is supplied separately or not at all. Check the listing and the part when it arrives. If your old camera lens glass is intact and the new back does not include one, you can carefully transfer the old lens glass, but it is often damaged during removal, so it is safer to have a replacement ready. A cracked lens cover causes hazy or flared photos.

Was the back cracked by a drop, or by the battery?

Most cracked backs come from drops. But if the back cover has lifted or bulged without an obvious impact, or the crack started from the middle rather than a corner, check the battery. A swollen battery pushes against the back and can crack or lift it. Signs include the phone rocking on a flat surface, a gap opening along one edge and the screen lifting slightly. If you suspect swelling, stop charging the phone and replace the battery before fitting a new back; otherwise the new cover will be pushed off again. Swollen lithium batteries are a fire risk and should be handled carefully or by a repair shop. When you replace one, take the old battery to a collection point rather than the bin, as GOV.UK explains in its guidance on waste batteries.

Choosing a good replacement cover

Replacement backs vary. When you choose one, consider:

Fit: the cover should match the S10's curved edges and camera cut-out precisely. Dry-fit before peeling the adhesive.
Adhesive: a pre-applied adhesive gasket saves time and gives a more even seal than cutting your own strips. Our S10 covers include adhesive.
Colour: Samsung's prism finishes are distinctive; choose the closest match to your frame.
Camera lens glass: check whether it is fitted, as covered below.

Dealing with badly shattered glass

If the back is shattered into many small pieces, the usual suction-cup method may not work. In that case:

Cover the whole back with overlapping strips of clear packing tape, pressing it down firmly.
Heat as normal and try the suction cup on the taped surface.
If the cup will not hold, start at an intact corner with a pick, and work in small sections, lifting fragments with the tape.
Expect some pieces to stay stuck to the adhesive. Remove them with a plastic card after the main panel is off.
Wipe the frame and inside of the phone with a lint-free cloth to collect tiny shards before fitting the new back.

Wear safety glasses throughout; glass fragments can flick up as the adhesive releases.

How much does Galaxy S10 back glass replacement cost?

For a DIY repair, the main cost is the cover itself: from £4.89 to £6.89 depending on colour in our store. Add the cost of any tools you do not already own, such as a suction cup, picks and isopropyl alcohol. If a repair shop does the work, labour is added; ask for a quote that includes the part and a camera lens cover if needed. Samsung also offers repairs through its UK repair service, which you can use as a comparison.

Is it safe to use a Galaxy S10 with cracked back glass?

Usually, yes, for a short time. But:

Glass splinters can cut your hand. Cover cracks with clear tape or a case.
The phone is no longer water resistant. Keep it away from liquids.
Dust and moisture can reach the wireless charging coil and cameras.
Cracks often spread, especially near the camera.

Tools you need

Heat pad, hairdryer or heat gun on a low setting.
Suction cup.
Several thin plastic opening picks.
Plastic card or spudger.
Isopropyl alcohol (90% or higher) and lint-free cloths.
Clear packing tape (for shattered glass).
Safety glasses and cut-resistant gloves.
Clamps, rubber bands or a soft weight to hold the new back while the adhesive bonds.

Our repair tools collection has opening tools and accessories. iFixit hosts photo guides for the Galaxy S10.

How to replace Samsung Galaxy S10 back glass: step by step

Back up the phone and power it off. Remove the SIM tray.
Tape over the cracked glass if it is shattered, so the suction cup can grip and fragments stay together.
Heat the back evenly for a few minutes, focusing on the edges. The glass should be hot but comfortable to touch. The S10 has curved edges; heat them well, because that is where the adhesive is.
Apply the suction cup near the bottom edge and pull gently to open a small gap.
Insert a pick into the gap and slide it along the bottom edge to cut the adhesive.
Work round the phone, adding picks as you go and reheating when the adhesive firms up. Keep picks shallow; the wireless charging coil and NFC antenna sit under the back.
Lift the back away once all adhesive is released. There are no cables attached to the back cover on the Galaxy S10.
Remove all old adhesive and glass from the frame. Use a plastic card and isopropyl alcohol. This is the most important step for a good finish.
Inspect the wireless charging coil and camera area for damage or glass fragments.
Fit the camera lens cover if it is supplied separately.
Dry-fit the new cover to check alignment around the cameras and edges.
Peel the adhesive liner from the new cover and press it into place, starting at the camera end and working along the edges.
Clamp or weigh it down gently for at least an hour to let the adhesive bond.

Test after the repair

Power on and check the phone works normally.
Take photos with every rear camera, and check for haze, dust or flare.
Test wireless charging on a Qi pad, and Wireless PowerShare if you use it.
Test NFC with a contactless payment or an NFC tag.
Check the edges sit flush with no lifting.

Protecting the new back

Glass backs crack most often from drops onto a corner or onto the camera bump. A slim case with raised edges around the cameras prevents most of this damage. If you prefer not to use a case, a back skin or film protector at least guards against scratches. Avoid magnetic car mounts that need a metal plate stuck to the back, as removing the plate later can stress the glass.

Restoring water resistance

The Galaxy S10 was rated IP68 when new, as listed in Samsung's Galaxy S10 specifications. Any repair that opens the phone affects that seal. A careful repair with a full adhesive gasket restores some splash protection, but no independent repair can guarantee the factory rating. Treat a repaired phone as splash resistant and keep it out of water.

Common mistakes

Buying a cover for the wrong S10 model.
Not cleaning off all the old adhesive, which makes the new cover sit high or lift.
Overheating the phone, which can damage the battery or the curved screen.
Pushing picks too deep and damaging the coil.
Forgetting the camera lens cover.
Using the phone immediately before the adhesive has bonded.
Skipping eye protection when lifting shattered glass.

Should you do anything else while the back is off?

With the back cover removed, you are halfway to reaching the battery, which sits under the wireless charging coil assembly. If your S10 battery is weak, this is a good moment to replace it too, so you only reseal the phone once. Our guides to Galaxy S20 and S21 battery replacement and Galaxy S21 Ultra battery replacement explain a very similar process. If the screen is also damaged, see our guide to Samsung curved screen replacement for the general approach.

Is it worth repairing a Galaxy S10?

The Galaxy S10 launched in 2019 and no longer receives Samsung software updates. A back cover is an inexpensive repair, so it is usually worthwhile on a phone that still works well, especially as a backup phone, a child's phone or for selling, where a clean back improves the price. If the phone needs several repairs, compare the total with a newer phone that still gets security updates.

DIY or repair shop?

Galaxy S10 back glass replacement is a good first repair for a careful beginner, because no cables are attached to the back and the internal parts stay in place. Use a repair shop if the phone has liquid damage, the battery is swollen and pushing the back out, or you also need a screen replacement and want both done together.

Frequently asked questions

How do I replace Samsung S10 back glass?

Heat the back to soften the adhesive, lift it with a suction cup and plastic picks, clean all old adhesive from the frame, then press on a new cover with fresh adhesive and clamp it while it bonds.

How much is Samsung S10 back glass?

Our Galaxy S10 battery covers with adhesive cost £4.89 to £6.89 depending on colour (checked 15 October 2026).

Is the S10 back glass the same as the S10+ or S10e?

No. Each model has a different size and camera layout. Order the cover for your exact model.

Does the new back cover come with adhesive?

Yes. Our Galaxy S10 covers include adhesive.

Does the back cover include the camera lens glass?

Check the listing and the part on arrival. If it is not included, transfer the old lens glass or fit a replacement lens cover.

Will wireless charging still work after replacing the back?

Yes, as long as the wireless charging coil is not damaged during the repair. Test it afterwards.

Next step

Confirm your model is the Galaxy S10 (SM-G973F), pick the cover in your phone's colour, and order it with any tools you need. Fit it using the steps above, clamp it while the adhesive bonds, and test the cameras and wireless charging before everyday use.