For Motorola Moto E7 Power Charging Port Board

This is a replacement charging port board for the Motorola Moto E7 Power. It fits in the same position as the charging port the Motorola Moto E7 Power was supplied with, and is intended for phones that are not charging, charge only when the cable is held at an angle, or have a loose or intermittent connection at the socket.

Before fitting starts, confirm the exact model of your Motorola Moto E7 Power, since phones that look identical from the outside can use a different charging port between versions; back up the phone before opening it, as this type of repair is not easily reversed once the case is broken open.

• Motorola Moto E7 Power
• Check your model before ordering: charging ports differ between models and versions that look alike.
• Model number: Settings › About phone

• The phone only charges when the cable is held at an angle, or charging keeps starting and stopping.
• The cable feels loose or falls out of the socket.
• The phone is no longer recognised by a computer, or data transfer drops out.
• Charging has slowed down even with a known good cable and plug.
• A moisture or connector warning appears when the charger is plugged in.
• Before replacing, gently clear lint from the socket with a non-metal tool and try another cable — this sometimes solves the problem.

On most Android phones go to Settings › About phone to see the exact model name and model number. Match it to the model shown on this page before ordering.